WHITE LIGHTNING | CLEAN RIDE

$22.00 $26.99

Clean Ride is a wax based lubricant that is perfect to use on your ‘Race Optimised Chain’ also offered in the RPG shop. To extend the duration of your Race Optimised chain after 200-300km, apply ‘Clean Ride’ to adhere to the previous wax on the chain and extend the supremely low friction your optimised chain provides.


DESCRIPTION:

• Sets up as a dry wax film to keep your chains and gears last longer and perform better

• Self-cleaning action is activated by any dirt, grit, or grime that works its way into your chain or parts

• When used regularly and properly, you'll rarely have to clean your chain

DETAILS:

• A unique wax-based lubricant, so it is crucial to start with a clean chain

• Do not mix Clean Ride with oil-based lubricants

• Requires more frequent re-application after dirtier rides

Clean Ride is a wax based lubricant that is perfect to use on your ‘Race Optimised Chain’ also offered in the RPG shop. To extend the duration of your Race Optimised chain after 200-300km, apply ‘Clean Ride’ to adhere to the previous wax on the chain and extend the supremely low friction your optimised chain provides.


DESCRIPTION:

• Sets up as a dry wax film to keep your chains and gears last longer and perform better

• Self-cleaning action is activated by any dirt, grit, or grime that works its way into your chain or parts

• When used regularly and properly, you'll rarely have to clean your chain

DETAILS:

• A unique wax-based lubricant, so it is crucial to start with a clean chain

• Do not mix Clean Ride with oil-based lubricants

• Requires more frequent re-application after dirtier rides

RPG | OPTIMISED RACE DAY CHAINS RPG | OPTIMISED RACE DAY CHAINS RPG | OPTIMISED RACE DAY CHAINS RPG | OPTIMISED RACE DAY CHAINS RPG | OPTIMISED RACE DAY CHAINS
RPG | OPTIMISED RACE DAY CHAINS
from $140.00
Optimised Race Day Chain:

INSTRUCTIONS

1. Locate your master link to quickly and easily remove chain (master link pliers required). Completely clean and dry chain before first application.

2. To melt wax pellets, place the HALO™ bag in a pot of water and bring the water to a gentle boil. Alternatively, pour pellets into a slow cooker to melt the wax.

3. Secure chain on the Immersion Tool provided in bag.

4. Once the wax pellets are fully melted, remove bag and set on covered work surface.

5. Use Immersion Tool to submerge chain into the melted wax.

6. Leave chain in the wax for at least 3 minutes to ensure full penetration into chain bushings.

7. Remove chain from hot wax and hang until fully dry (approximately 30 minutes). Note: Some wax will drip from the chain.

8. Once dry, manipulate chain before reattaching chain to your bike. Note: It is normal for excess wax to flake off.